NEW PROJECTS
NEVER STOP SURPRISING
GIGATRON FILTER PRESS
THE BIGGEST FILTER PRESS IN EUROPE
The Gigatron Filter Press is one of the new projects of the year. It is used for quarries and mines and for heavy duty applications.
The Gigatron Filter Press is available in the following models:
3000×3000
FIELDS OF APPLICATION FOR THE GIGATRON FILTER PRESS
TWIN FRECCIAROSSA FILTER PRESS
2X FASTER THAN OTHER FILTER PRESSES
The Twin Frecciarossa Filter Press is a filter press that is more productive in terms of running time and the amount of sludge to be processed with the same footprint.
It is also optimised from the point of view of surface area occupied, reducing the footprint of the machine.
This filter press is also optimised from an economic point of view, reducing the cost of the structures and engineering work required for operation.
FIELDS OF APPLICATION FOR THE TWIN FRECCIAROSSA FILTER PRESS
TESTALTA FILTER PRESS
HIGH FILTRATION
The Testalta Filter Press uses the same basic technology as any other filter press to dewater the muddy material and recover the reusable filtered water. The filter plates are suspended from a beam above the filter press. A hydraulic cylinder and four tension bars are used to clamp the plates together, while a sludge feed pump pushes the sludge between the plates where the sludge solids accumulate and the filtered water passes through the filter fabrics mounted on the surfaces of the plates. The plates are opened using a chain slide system mounted on the beam and designed to separate the filter plates one at a time after the set of plates has been hydraulically released.
The bottom and both sides of the filter plates are completely open and unobstructed, preventing any interference with the panel drain. The overhead beam design also allows the easiest access to the filter plates and filter fabrics for cleaning and maintenance.
FIELDS OF APPLICATION FOR THE TESTALTA FILTER PRESS
REQUEST A QUOTE
Contact us by phone at +39 0585 8365 or by email matec@matecindustries.com